Home > Products > tend:INSULATED ENCLOSURES   
    tend : INSULATED ENCLOSURES
 

 INSULATED ENCLOSURES 22/30 mm
   TN2-Bx/TN3-BX


PLASTIC BOXS  Hole Size 22/30 mm
͡ʵԡ


TN2-B1   22 . 1 ͧ
TN2-B2   22 . 2 ͧ
TN2-B3   22 . 3 ͧ
TN2-B4   22 . 4 ͧ
TN2-B5   22 . 5 ͧ


TN3-B1   30 . 1 ͧ
TN3-B2   30 . 2 ͧ
TN3-B3   30 . 3 ͧ
TN3-B4   30 . 4 ͧ
TN3-B5   30 . 5 ͧ



 INSULATED ENCLOSURES 22 mm
   TN2-BA/TN2-BB/TN2-BC


The mounting holes of this series of insulated enclosures are ∅22 mm. Single-hole insulated enclosures are available in yellow and gray. All the others are in gray, the upper base and contact block are of exclusive type, which is different from those of ∅22/∅30 series control components. The dimension and type of the upper buse are same as those of ∅22/∅30 series control components.


TN2-BA (TN2-B1A)
͹ᷤͤԵ존 1A (1NO) ѺѺͤʵԡ
TN2-BB (TN2-B1B)
͹ᷤͤԵ존 1B(1NC) ѺѺͤʵԡ
TN2-BC (TN2-B1C) 1NO, 1NC
͹ᷤͤԵ존 1C (1NO,1NC) ѺѺͤʵԡ


   
 

 INSULATED ENCLOSURES 22/25/30 mm
   TC-Bxx


Դѹ, ѹѹ, ѹ IP 65  IEC144


The mounting holes of this series of insulated enclosures are f22 mm/f30 mm. Single-hole insulated enclosures are available in yellow and gray. All the others are in gray. The upper base and contact block are of exclusive type, which is different from those of f22/f30 series contact components.
The dimension and type of the upper base are same as those of f22/f30 series control components. The symbol of this type is : by adding B to the type No. of f22/f30 series control components. For example : T2BFR stands for the upper base of f22 flat-head round type push button : and T2BFR-B refers to the exclusive upper base of the insulated enclosures.


THE ASSEMBLY OF INSULATED ENCLOSURES AND SWITCH
1) Take apart the upper cover and the lower base of the insulated enclosures.
2) Fix the contact block on the lower base, and the upper base on the upper cover. (Standard contact block needs underneath packing)
3) Connect the upper cover with the lower base into one kit.
    The protection structure for this series of insulated enclosures is IP65 (IEC144)
    All the illuminated switches used in the insulated enclosures are direct type.


 INSULATED ENCLOSURES 22/25/30 mm
   TC-BIxx


Դѹ, ѹѹ, ѹ IP 65  IEC144


The mounting holes of this series of insulated enclosures are f22 mm/f30 mm. Single-hole insulated enclosures are available in yellow and gray. All the others are in gray. The upper base and contact block are of exclusive type, which is different from those of f22/f30 series contact components.
The dimension and type of the upper base are same as those of f22/f30 series control components. The symbol of this type is : by adding B to the type No. of f22/f30 series control components. For example : T2BFR stands for the upper base of f22 flat-head round type push button : and T2BFR-B refers to the exclusive upper base of the insulated enclosures.


THE ASSEMBLY OF INSULATED ENCLOSURES AND SWITCH
1) Take apart the upper cover and the lower base of the insulated enclosures.
2) Fix the contact block on the lower base, and the upper base on the upper cover. (Standard contact block needs underneath packing)
3) Connect the upper cover with the lower base into one kit.
    The protection structure for this series of insulated enclosures is IP65 (IEC144)
    All the illuminated switches used in the insulated enclosures are direct type.

   
 

 INSULATED ENCLOSURES 22/30 mm
   T2-Bx/T3-BX


PLASTIC BOXS  Hole Size 22/30 mm
͡ʵԡ , ͧ


T2-B1   22 . 1 ͧ
T2-B2   22 . 2 ͧ
T2-B3   22 . 3 ͧ
T2-B4   22 . 4 ͧ
T2-B5   22 . 5 ͧ


T3-B1   30 . 1 ͧ
T3-B2   30 . 2 ͧ
T3-B3   30 . 3 ͧ
T3-B4   30 . 4 ͧ
T3-B5   30 . 5 ͧ


   
 
 
Page(s) 1


   

Copyright © 2008 Teerachaiphaisal.co.th All Rights Reserved.
ѷ ê 繨 ӡѴ  286, 288 ࢵ1 ǧѴ෾Թ ࢵҺ ا෾ 10100
. 0-2225-1825 ῡ. 0-2225-6169 e-mail : info@teerachaiphaisal.co.th